Insert Deadbolt Latch Set into door edge hole with the word “UP” and the arrow on the extension plate facing UP. INSTALLING THE DEADBOLT LATCH SET (need phillips head screwdriver) a. Mark center hole on door face through guide on template for 2-3/8” (60mm) or 2-3/4” (70mm) backset (Figure 2b). Mark center hole on door edge through guide on template for 1” (25mm) latch bolt (Figure 2a). Fold template and place on door 36” (925mm) from the ground as marked (Figure 1b). Cut out template printed on page 15 of this Manual (Figure 1a). PREPARE DOOR AND JAMB NOTE: For installation on doors with pre-drilled holes skip to page 4. Pull and twist the extension plate all the way out (Figure 1c). Rotate the cylinder cover clockwise (Figure 1b). Hold latch with numbers facing forward and thumb pressing on the bolt (Figure 1a). 1-3/8” (35mm) Screws - 1 ea.ĪDJUSTABLE DEADBOLT LATCH SET NOTE: Deadbolt Latch Set is shipped with the backset set at 2-3/8” (60mm) Measure the backset (backset is distance between edge of the door and the center of Lock). INSTALLATION INSTRUCTIONS Package Contents Entry keys (2 ea.) Deadbolt Latch Set (Adjustable) 2-3/8” (60mm) to 2-3/4” (70mm) Mounting Plate Interior Assembly Exterior Assembly 5/16” (8mm) Screws - 2 ea. Index INSTALLATION INSTRUCTIONS Package Contents / Tools Required. ENGLISH Installation & Operation Guide Digital Deadbolt Model DDBKP Read this manual carefully before installing and operating!
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |